Day-to-dayUpdated 25 Oct 20263 min

Hotel & stays: rooms, bookings and GST bands

Add your rooms and beds once, take bookings that can never double-book a room, read every reservation, and see the GST bands on a room night (shown, never charged until your CA signs them off). Not switched on for every workspace yet.

Business ownerFront desk

Hotel & stays keeps your rooms, beds and bookings in the same books as your invoices. It is for a hotel, lodge, homestay, guest house or PG. It is not switched on for every workspace yet; where it is off, the Hotel & stays pages do not open. Where it is available, approving your hotel setup (Apply setup) switches Hotel & stays on for you; you can switch it off again in Settings, Modules.

Your first ten minutes

A new hotel workspace sees a checklist at import and setup: list each room type as an item sold per night (SAC 9963), add your rooms, set a nightly rate for each room type, and ask your CA to confirm the GST bands before you record that sign-off in Hotel settings. Corporate accounts, travel agents and staff roles can wait. If you would rather look around first, tap Try with sample data on the dashboard: it opens the room board with sample rooms and stays, every row labelled [SAMPLE] and removable from Profile, Account, Clear sample data. A checked-in sample stay and its bill appear only after the GST sign-off is recorded, and the message says so.

1. Add your rooms and beds

Open Rooms and beds. Type your room numbers as a list or a range, such as 101-110, 201-205, G1, add an optional floor, and add them in one go. For a dormitory or a PG, add beds inside a room (Bed A, Bed B and so on).

A room you no longer let can be deactivated; its history stays. A room with live bookings cannot be deactivated until you move or cancel them.

What is in each room

Under a room, In this room lists its fittings. Tap Add an asset, type What it is (an AC, a TV, a geyser) and, if you have them, the make, model, serial number and the date it was last serviced, then tap Save asset. When it is serviced again, pick the new date and tap Save date; Remove takes an asset off the list. Until a setup step is done on your workspace, the room says Room assets are not set up in this database yet, so they are not shown.

2. Take a booking

Open New reservation, pick the check-in and check-out dates and tap Check availability. Finocket shows, for each room type, how many rooms are free on every one of those nights; pick a room type (and a room, if you like), then pick or add the Guest, and enter the guests, the rate per night and, if you ask for one, the advance. A note is optional. You can save a booking without a guest, but check-in needs one because the bill is made out to them; for a stay booked without one, the front desk shows Attach guest until you add one. If the booking came through an OTA, choose it under Booked through and enter the OTA's commission, so the booking appears in the OTA settlement report.

For a PG or hostel resident who pays every month, choose Long stay (PG / hostel) instead: pick the room or bed, the resident, the move-in date and the monthly rent, and a deposit if you take one. The stay then shows on Residents, where you start its rent schedule.

Meals and electricity for residents

On a resident, Meals and electricity adds two monthly charges:

  • Meal plan. Choose the meal item from your catalogue and the monthly amount, and tap Save meal plan. It is billed with the rent each month, so start the rent schedule first. Remove meal plan takes it off the rent.
  • Electricity meter. For the room, enter the month, the previous and current readings, the rate per unit and the electricity item, then tap Record reading and draft the charge. Finocket makes a draft invoice for the resident. Tick Split between everyone who stayed in the room that month to share the charge, one draft each; otherwise the whole charge goes to this resident. Recording the same reading again makes nothing new, and a different reading for a month already billed is refused: change it with a credit note.

Both lines carry the GST rate and HSN/SAC of the item you chose. Ask your CA whether they are taxable before you send them.

Holding a room without confirming

When a caller wants a room but has not committed, fill in Hold without confirming (optional) on the booking: set Hold until (date) and Hold until (time). The room is kept for them until then. If the booking is not confirmed by that time, the hold lapses and the room goes back on sale. Finocket releases lapsed holds once a day. To free them sooner, open Reservations: when a hold has lapsed, it shows Release lapsed holds now. It reports how many it released, how many it kept for the desk and how many it could not release. A hold on which an advance was taken is kept for the desk to deal with, never cancelled by itself. On Reservations, a hold shows Held until or Hold lapsed with the time.

Day use: a room for a few hours

On New reservation, choose Day use. Pick the Day, From and Until, check availability and pick a room, then the guest and the number of guests. For the price, tap Use the day-use rate to take it from your day-use rate plan, or type a Day-use price yourself. Tap Book day use. The room is held for that night and is not sold again until the next day.

Set your room rates once

Open Room rates to set the rate for each room type. A rate can be for the whole year or for a season, for chosen weekdays (a weekend rate), for a meal plan such as EP, CP, MAP or AP, and for a minimum number of nights. When two rates could apply to the same night, the more specific one is used. On New reservation, tap Fill from room rates to price every night from these rates; you can still type a rate yourself and it wins. If a night has no rate, Finocket says so and does not book it at zero. Under Rate floor and ceiling on the same screen, the owner can set the lowest and highest rate per night for a room type. The desk cannot book a night outside it; the owner can override it with a reason, and every override is recorded. To enter a whole tariff card at once, paste it from Excel into Import the tariff card from a sheet, check it, then add it; rates you already have are skipped, and you can undo an import.

Add a charge to the guest's bill

Once a guest is checked in, the front desk shows Charge to the guest's bill. Type what it is for, the price of one, the quantity, the GST rate and the HSN/SAC code, then tap Add to bill. Finocket adds the line to the guest's open bill. It never fills in a GST rate or code for you, and it refuses until your CA has signed off the GST bands. Once the bill has been sent or paid, a change goes through a credit note raised by a person; nothing is changed automatically. Tapping twice does not add the line twice.

For a long stay of 15 nights or more, the front desk screen can preview what the bills would hold if they were raised once a week, a fortnight or a month instead of once at check-out: each cycle with its nights, its total from the stay's own nightly rates, the advance held adjusted against the cycles that are over, and what is still due. A night with no rate makes its cycle's total show as not known, never zero. It is a preview only: no bill is raised from it, and how such a bill is taxed is for your CA to confirm.

Where your deployment has switched it on, the payments panel of a stay can ask the guest for an advance by payment link. It makes the link on your own payment account and shows it to copy or send on WhatsApp. Nothing is recorded when you make the link: the advance appears in the list, counted with the other advances, only when the guest has paid and your payment provider has said so. A link that is never paid records nothing.

The owner can save the extras the desk charges often, such as a minibar item, a laundry item or a service, under Settings, typing each one's price, GST rate and HSN/SAC code. Finocket never fills a rate or a code in; the treatment is your CA's decision. When you charge a guest at the front desk, a saved extra is posted at exactly the price, rate and code the owner saved, and only the quantity can change; to charge something different, edit it as a manual line. An extra can be switched off but not deleted, so an older charge stays explainable.

Open the guest's bill

A stay that has a bill shows Open the bill on the front desk. The bill is a draft that Finocket opened at check-in. After check-out, open it, check the lines and finalise it yourself; Finocket never finalises a bill for you.

Close the day

Day close lists, for a date, the check-outs that are overdue or due, the arrivals who have not been checked in and who is staying on. Open a row to go to its front desk. It is a list only: it posts no room charge, and posting nightly charges waits on your CA's sign-off of the GST bands.

A guest walks in

On New reservation, pick the check-out date and a room, then tap Walk-in: check in now. Finocket books the stay from today, confirms it and checks the guest in. If the guest's ID or an advance is still needed, the stay is saved and you finish at the front desk; nothing says checked in until it is.

3. Read your reservations

Reservations lists every booking, newest check-in first, with its dates, stage, guests and the advance you asked for. Load more brings older bookings in; nothing is hidden by a date filter.

Guests finds one guest and shows their stays, newest first, 25 at a time: tap Load older stays for the next 25. The totals at the top cover only the stays loaded so far, and the screen says so. Stay preferences keeps the comforts a guest likes for their next stay, from a fixed list (quiet room, high floor, king bed and so on); nothing else is kept, and ID documents never show here. If preferences cannot be read or saved, the screen says so; it never shows an empty list for a failed read. If preferences are not switched on in your database yet, the panel says that and saves nothing.

When the dates are full: the waitlist

Open Waitlist from Reservations. Under Add a request, enter the party (a caller, family or company), the check-in and check-out dates, the Room type (or Any room type), the guests and a contact note, then tap Add to waitlist. A waiting request keeps no room.

Each request shows A room is free now when a room of its type is free on every night it asked for, worked out from today's availability, or Still full. When any waiting request has a free room, Reservations shows how many. To take one, tap Book a stay and book it as a normal reservation, then come back and tap Mark booked. Drop closes a request you no longer need. Until a setup step is done on your workspace, the page says the waitlist is not set up yet.

4. The room board and the front desk

Room board shows every room and who is in it, night by night: each bar is a stay, and you can step back or ahead a week. On a phone you pick one night and see each room as free or taken; on a larger screen you see two weeks at once. Stays booked by room type with no room assigned yet are listed under the board, so none goes missing.

Pick a night and every room is a tile with the guest's name, the nights left, the balance due and a Check-out today marker. The counts above the tiles say how many rooms are in house, leaving today, blocked, confirmed, reserved or vacant, each with its own icon as well as its colour. Every room is counted once, so the counts add up to the tiles, and tapping a count lists just those rooms. Occupancy always shows its basis, for example 15 of 24 rooms. A balance that says it is not known could not be read, and is never shown as zero.

Where your deployment has switched it on, a stay can be moved to another room straight from the board: drag its bar onto the room you want, or open Move room on its tile to see the rooms it can go to, nearest first. You always see a confirm line before anything changes. The move is the same room change the front desk makes, so its rules still apply: a guest in house moves only within the same room type, into a room that is ready, from tonight, and a room that is taken or blocked on those nights is refused with the reason.

Tap a stay to open it at the front desk. From there you can confirm it, check the guest in or out, cancel it or mark a no-show. Before the guest arrives you can move the stay to another room (a room already taken for those nights cannot be chosen), and you can extend it with a later check-out. The nights already booked keep their rate; you enter the rate for the nights you add. You can also Edit the booking there to change the arrival date, the number of guests, the rate plan or the rate per night; a rate you type applies to every night.

The owner of more than one property can open All properties from the reservations screen to see every property's day side by side: how many rooms have a guest in them, arrivals, check-outs due, guests overdue to leave and guests in house, with the totals. Each property is read on its own and only counts are shown. A property that could not be read says so, is left out of the totals, and the totals say they are partial; it is never counted as zero.

All properties: the money, the API and the assistant

When the money switch is on for your deployment, All properties also shows, for the day, the room revenue posted (the room-night lines on each property's stay folios, with the GST on those lines kept apart) and the payments taken (advances and check-out receipts, with security deposits apart and refunds out). Room lines only: extras, restaurant and other bills are not in it. Seeing a property's money also needs the reports permission on that property, the same as the revenue reports. With the switch off the screen shows counts only.

A property is never added up as zero when its figures are missing. If a property could not be read, or you do not hold the reports permission on it, it is named as unknown, left out of every total, and the totals say they are partial and how many properties are missing and why. While any property is unknown, read a total as at least this much, never as exactly this much.

The same day is available to your own software as GET /api/v1/stays/portfolio?date=YYYY-MM-DD, with an API key or a connection that holds the stays:read permission. It is read only and answers in whole paise. A key pinned to one company sees only that company, never a sibling property its owner also holds. The properties that could not be stated are listed in unknown, with the property, the part (the day or the money) and the reason (could not be read, or no access). It answers not found until Hotel & stays is switched on.

An assistant connected through MCP can ask for the same answer with the stays_get_portfolio_day tool. It takes the date and returns exactly what the API returns, for the same permissions. It can only read: it cannot change a booking, a bill or a payment.

5. Property settings and GST

Property settings shows your check-in and check-out times, the GST bands that apply to a room night, and your compliance status, including how long guest ID records are kept after a guest leaves. When your CA has reviewed the bands, the business owner ticks that they have, optionally notes the CA firm and date, and taps Record the CA sign-off. Other team members see that only the owner can record it.

6. Housekeeping

Open Housekeeping for the status of every room today. Tap a room to change it: clean, dirty, inspected or out of order. The Rooms to clean list puts rooms with a guest arriving first, then empty rooms that are dirty, then departures and stay-overs. A room whose guest has not left yet shows that it is to be cleaned after check-out.

A team member given the Housekeeping role sees only the rooms: they can mark a room clean or dirty and be given a room for the day. They cannot open bookings, guest registers, rates or the night audit, change a room itself, or take a payment; those stay with the front desk and the owner. If your staff are kept in ashr.work, Staff received from ashr.work lists the people it has sent to this workspace. The list is read-only: Finocket does not verify them, and a person is changed in ashr.work, not here.

Housekeeping can register an item a guest left behind: what it is, the room and where it was found, and a photo taken with the device camera. The front desk then records that it was handed to a named person, or disposed of, and a closed item is never changed afterwards. Housekeeping sees the register but not the name an item was handed to. The register stays off until the database step for it is applied.

The turnaround report shows how long rooms stay dirty before they are cleaned, and how long clean rooms wait for inspection, over the last seven days or any range up to 31 days, with the rooms that are still dirty. It is about rooms and times only: it does not say who cleaned a room. It stays off until the database step that keeps the log is applied, and it starts counting from that moment.

Anyone on the floor can report a fault, such as an air conditioner that is not cooling, with an optional room and a priority. The front desk moves a ticket from open to in progress to resolved, types the name of who is fixing it, and can reopen a repair that did not hold. The list shows unresolved and urgent tickets first. Maintenance tickets stay off until the database step for them is applied.

Give rooms a zone such as Garden wing or Beach block, and the day's Rooms to clean list can be split evenly between the people on a shift: type their names and, if you like, a shift label, and each person gets a run of neighbouring rooms. Rooms that already have a name keep it. Setting a zone is for the front desk and the owner; splitting the list is open to housekeeping. Both stay off until the database step for them is applied.

Give each room type a cleaning checklist of up to 200 lines, such as changing the linen or checking the minibar. Housekeeping ticks the lines for a room on a tablet, a supervisor signs the room off once every line is ticked, and the cleaning report shows each room as blocked, dirty, pending (cleaned but not signed off) or clean, with a count of vacant rooms. Writing a checklist and signing off are for the front desk and the owner; ticking is open to housekeeping. Both stay off until the database step for them is applied.

7. Register your guests

Open Register a guest, choose the stay, and add each guest with the type of ID and its last four digits. A foreign guest is marked foreign. The list under Registered guests shows who is registered on that stay, or says that nobody is yet. Check-in asks for a registered guest, a room and the advance, and tells you which one is missing.

Switch on Foreign national (Form III) during registration, and once the Form C step is turned on for your workspace it appears right there: a printable or downloadable sheet, filled from what you typed plus passport, visa, where the guest is coming from and other details it asks for separately. Finocket never files this: file it yourself on the portal, or hand over the printed sheet. Passport and visa numbers show in full on screen and on the printed sheet; only the CSV export masks them to the last four digits. Tap Check to validate the sheet; Export CSV stays disabled until the sheet passes.

8. Reports and the ITC basis

Stay reports shows occupancy, ADR, RevPAR, arrivals and room revenue for the dates you choose.

Each of these reports has a Download CSV button. The file holds exactly the numbers on screen, with money in rupees and occupancy in percent; a figure that could not be worked out, such as ADR when no room was sold, is left empty rather than shown as zero.

Where your workspace has switched them on, Stay reports also has three daily reports. Balances due lists the stays in the dates you choose whose bill still owes money, largest first; a bill that owes nothing is not listed, and a balance Finocket could not read shows as not known, never as zero. Cancellations lists the stays due to arrive in those dates that were cancelled or did not arrive, with the room value their recorded rates would have brought before tax; that is not revenue. In house lists who is checked in today with nights left and the bill balance, and marks anyone past their check-out date as overdue. Each one has Download CSV, and so do Deposits held and GST by band. No guest name is in any file. These reports only read; they settle and cancel nothing.

Collections shows the money taken in the dates you choose, by payment mode, with each payment counted once: an advance that was applied to a bill is inside the advances, not added again, and deposits are shown apart because they are refundable. Extras lists the minibar, laundry and service charges on the bills of the stays in the dates, by item and before tax. Both have Download CSV.

ITC reversal basis splits your room-night turnover into the lower and higher GST bands, for your CA to work out the proportionate input tax credit reversal. Nothing is posted from it.

9. Room service by room QR

A guest can order food to the room by scanning a QR code kept in the room, with no app and no login. The guest scans it, sees the restaurant menu, picks what they want and sends the order to the kitchen. There is not yet a button on the reservation screen for staff to show or print the room QR, so the code cannot be handed out from the app today.

  • The QR belongs to one room and one stay. Once the guest has checked out, or the stay is cancelled, the code stops working.
  • An order reaches the kitchen like any other restaurant order. It is not charged to the room just by being placed.
  • Charging a room-service bill to the guest's room is a separate switch, off by default. While it is off, staff settle the bill the usual way, at the till.
  • The page shows no prices of your other guests and no booking details, only the menu and the guest's own order.

Restaurant bills charged to a room use the Restaurant GST sign-offs screen. The owner records each SAC code and GST rate pair that your CA has signed off, and can revoke one. A bill is charged to a room only if its pair is on the list. The screen opens only where it has been switched on for you; only the owner can add or revoke, and others can read the list.

10. Banquet halls and bookings (built, switched off)

Add a hall or board room under Banquet halls. Each has one rate, a flat hire or an hourly rate, and you type the GST rate and SAC code yourself; nothing is filled in or suggested.

Under Banquet bookings, choose a hall and place a hold for a date and time. A hold keeps the hall for the minutes you set (60 if you leave it empty, from 5 to 1440) and then lapses. A hold is not a confirmed booking, and a clash with another held or confirmed booking is refused.

Open a booking with Open. A held booking can be confirmed with Confirm booking, where you state the place of supply. A confirmed booking takes a deposit schedule with Save schedule, which only sets due dates and records no payment, and its bill with Post bill. A bill needs a client on the booking, and every extra needs its own GST rate and SAC code. Cancel booking is refused once a bill is posted.

Under Banquet menu packages, create a package: your menu items at one price per guest, with a GST rate and SAC code you type. Choose it on the hold form under Banquet bookings. A confirmed booking that has a package shows Show the kitchen ticket, a read-only draft that is not sent to the kitchen.

Under Banquet calendar, see the held and confirmed bookings of all your halls for the next two weeks, day by day. A hall that could not be read is named, and that does not mean it has no bookings. Open a booking to reach its Deposit schedule, which shows the instalments and the total they must add up to, and its Event bill, which shows whether the final bill is posted. Both only show what is saved; you set the schedule and post the bill on the booking itself.

9. Bill of supply for composition and unregistered companies

The bill follows the company's own GST registration. A company on the composition scheme, or with no GSTIN in GST settings, gets a bill of supply with no tax and the matching declaration, on the room folio, the restaurant bill and the banquet bill. A company that has not filled in GST settings sees no change. If the registration type and scheme disagree, or the registration does not issue sales invoices, billing stops with a message until the settings are corrected. No rate is chosen for you; your CA signs the rate for each revenue centre.

10. Audit trail of money edits

Every edit to money on a hotel, restaurant or banquet bill is recorded with when and the amounts before and after: a folio line edited, added after the bill is issued or removed, a payment changed or removed, a refund, a cancelled invoice, a changed invoice total or discount and a stock adjustment. Restaurant voids and comps are shown with their reason and approver. Read the trail from the stays reports API or a connected assistant (the reports permission is needed as well as stays). Until the property's database update is applied the trail reads as not yet recording, which is different from having no edits.

11. Promo codes and packages

When promo codes are switched on for your workspace, the new reservation form shows Promo code (optional) and, if you have packages, Package. Type a code or pick a package, then press Fill from room rates. A code takes its discount off each night, so the GST band still follows the rate charged for that night. A package can set one bundle rate per night and lists what it includes.

The stay remembers which code or package priced it. If you type a rate per night yourself, that rate is used and no code is recorded. Saving checks the code again: if it has ended or no longer fits the room or the dates, the stay is not saved and you are told why.

What this does not do

  • Staff rosters, attendance, payroll and tips are not here; they belong in your HR system.
  • It does not file Form III or anything else with the government for you.
  • It does not connect to a channel manager or to OTAs, so OTA bookings are not pulled in for you.
  • An outside portal or a connected system can send a booking with the portal's own booking number, and sending it twice returns the same booking. The front desk screen has no field for that number yet.

Common questions

Does Finocket sync bookings from Booking.com, MakeMyTrip or Airbnb?

Not yet. Finocket does not connect to a channel manager or to OTAs yet; enter OTA bookings here and match them to the OTA statement. Choose the OTA under Booked through when you take the booking, and open OTA settlements to compare what each OTA should have paid with what it did.

Parts made for your trade

Each part below opens only where it is switched on for your workspace. Ask your administrator if one is missing.

  • Rooms, room types and beds
  • Rate plans and seasons
  • Reservations and room board
  • Check-in and guest register
  • Guest folio and checkout
  • Room GST per night
  • PG rent roll and deposits
  • Housekeeping room status

Does this work offline?

Frequently asked questions

Why can I not open Hotel & stays?

It is not switched on for every workspace yet. Where it is off, its pages do not open at all.

Will Finocket charge GST on my room nights?

Not until your CA has reviewed the accommodation GST bands and the sign-off is recorded for your company. Until then the bands are shown, not charged.

Who records the CA sign-off, and where?

The business owner, on Stays settings: tick that your CA reviewed the GST bands, optionally note the CA firm and date, and record it. Other team members see that only the owner can.

Why does check-in say to attach the guest?

The stay's bill is made out to the guest. Pick the guest while booking, or use Attach guest at the front desk for a stay booked without one.

Related articles